Download Stock Firmware/Rom For Tecno W1

Download Stock Firmware/Rom For Tecno W1

Tecno W1 Key Specs:

• 4.5-inch Touch Display, 480 x 854 pixels (244ppi)
• 1.3GHz quad-core Processor with 1GB RAM
• Android 7.0 (Nougat)
• 8GB Storage with support for memory card up to 32GB
• 2MP Rear Camera and 0.3MP Front Camera
• Dual-SIM, Mini-SIM
• 1800 mAh Removable Battery

This page contains the factory stock rom for tecno k7 make sure your smartphone matches the specs below before using this  firmware and also not tecpharmacy will not be responsible for anything that may happen to your device, if you dont know how to flash a firmware/rom into a smartphone kindly give it to a pro for assistance.

DOWNLOAD TECNO W1 STOCK ROM/FIRMWARE
W1-B40030G1-N-161230V4
[Dowload Stock Firmware ##download##]

The below tutorial will show you how to flash a rom/firmware using sp flashtool for those who will like to do the flashing themselves.

HOW TO FLASH THIS DEVICE USING SP FLASHTOOL:

• Open Sp flashtool which has been installed on your pc if you dont have it get it HERE

• Locate and Click on Scatter-loading option & browse to the scatter file of your Stock ROM. ( the scatter file is always located inside the unzipped stock rom file you downloaded)

• Select the scatter file which is located in the stock rom downloaded file and load it

• Select the pattern you would like to use Eg DOWNLOAD ONLY, FORMAT ALL+ DOWNLOAD OR FIRMWARE UPGRADE.... after that click on download 
• Turn Off your device and connect it to your pc
           and wait for the device to complete flashing

• If you dont understand the procedure above click HERE to get full tutorial with images.

If you experience bootlop(phone hangs in boot logo) navigate to your phones recovery mode and perform a factory reset.