Gretel E2 Stock Rom Download
This is the factory stock firmware for gretel e2 and should not be used in another device, this firmware can be used to restore bricked gretel e2 device. Please before flashing backup your important files like your photos, music etc to avoid loss of files because after flash everything in the phones memory will be wiped out restoring it back to its normal factory mode.
HOW TO FLASH USING DOWNLOAD/UPGRADE
1 Unpack ROM and extract Gretel_E2_SC7731GA_V1.0_151027_B1.pac
2 Run UpgradeDownload or FactoryDownload, connect your android device to the computer
3 Click on "Load packet" and add the .pac
4 Click on "Start"
5 During the flashing, your mobile will restart automatically
6 Finish
HOW TO FLASH USING SPD UPGRADE TOOL
- Download and install spreadtrum drivers from here or here
- Download and extract SPD Upgrade Tool or Research Download.
- Inside the extracted file launch UpgradeDownload or Research Download
- Click load packet icon.
- Select the .PAC file of the spreadtrum device you want to flash or upgrade.
- Click on settings icon
- Uncheck all box in calibration tab.
- Tick erase all flash in flash operation tab (optional).
- Close settings.
- Click play or Download button.
- Hold volume down button & connect the device to the computer.
- When the blue progress bar is seen, release the volume button.
- Process is complete when the word PASSED in green colour
- For Full Tutorial on how to flash this click HERE
COMMENTS