Install Windows Os On Dual Os Tablets With Intel Chipset

Install Windows Os On Dual Os Tablets With Intel Chipset

Hey guys so today am going to show you how to install windows Os on Tablets using Intel chipset. It is usually done after installing Android OS on the device, if you don't know how to install android Os on this kind of device you can use the tutorial below. But if your android partition is still working well or you just want to use only the windows Os, you can skip this part.

How To Upgrade Or Flash Devices With Intel Chipset:

Before we proceed the following files below need to be downloaded and installed properly on your pc.. Works on all Windows Version.

The following files below can sometimes be found in upgrade tool folder inside firmware folder. If it’s not there, Download and install the following files below


iSocUSB-Driver-Setup >>DOWNLOAD HERE

intelAndroidDrvSetup>> DOWNLOAD HERE

ManufacturingFlashTool_Setup>>DOWNLOAD HERE

After Downloading and installing the above files copy CUSTOM_CONFIG.INI file found inside upgrade tool folder to C:\Program Files\Intel\Manufacturing Flash

For Full Tutorial with pictures Click HERE -> [Preview ##preview##]



The normal process to follow: Flash BIOS >> install Android >> install Windows


Please also note that you really don't need to flash the BIOS if the device problem is the crash of the operating system, the use of this tutorial is at owners risk and tecpharmacy will not be held responsible for anything that happens to your device.

Things You Need To Have Before Proceeding:

1. USB Flash Drive (minimum of 8GB)
2. OTG cable
3. USB Hub with at least 3 ports
4. USB keyboard (if device does not have one)
5. Battery power should be at least 40% or more..

1. You can skip Flashing BIOS and Installing Androidstep if you just want to install Windows OS direct.

*First

How To Flash The BIOS

• Format USB Drive (FAT)
• Rename USB drive to WINPE
• Extract firmware downloaded
• Copy files in BIOS folder to root of formatted USB Drive
• Connect USB hub to device
• Connect USB Drive and keyboard to hub
• Turn on device while pressing ESC key continuously (Some devices use F7, delete)
• Navigate to Boot manager
• Select USB drive from the list and wait for flash process to begin
• When it’s done, device will reboot automatically.

If you perform the flashing of the BIOS above, you will need to install android Os before you install windows Os in the device.
Just incase you feel like installing the android Os use the follow the tutorial above carefully.

*Secondly

Installing Windows OS

• First you will have to Format the USB flash drive (NTFS format)
• After doing that Rename the USB flash drive to WINPE
• Extract the firmware and open Windows image folder
• Copy all the files inside to the root of the USB Flash drive
• Connect the USB hub to device
• Attach USB Flash drive, and keyboard to the ports of the USB hub

• Now power on device while pressing ESC key continuously on keyboard (some devices use F7 or Delete key)
• The device should enter its Boot mode
• You can now use direction keys on keyboard and navigate to boot manager icon then press Enter key
• Use direction key and select the boot device from the list ie UEFI: USB Drive
• Press Enter key to start installation.
• Now wait till the installation process is complete usually takes about 10 – 30 mins

The device will boot after the process is complete.


Credit: tkaparas