Download Landvo XM200 Pro(MT6737) Factory Stock Rom
DEVICE SPECIFICATIONS:
- Dimensions: 71.8 x 143.2 x 9 mm
- Weight: 163 g
- SoC: MediaTek MT6737
- CPU: ARM Cortex-A53, 1300 MHz, Cores: 4
- GPU: ARM Mali-T720 MP2, 600 MHz, Cores: 2
- RAM: 2 GB, 640 MHz
- Storage: 16 GB
- Memory cards: microSD, microSDHC, microSDXC
- Display: 5 in, IPS, 720 x 1280 pixels, 24 bit
- Battery: 2200 mAh, Li-Ion
- OS: Android 6.0 Marshmallow
- Camera: 2592 x 1944 pixels, 1280 x 720 pixels, 30 fps
- SIM card: Micro-SIM
- Wi-Fi: b, g, n, Wi-Fi Hotspot
- USB: 2.0, Micro USB
- Bluetooth: 4.0
- Positioning: GPS, A-GPS
Your about to download thd factory stock rom for landvo xm200 pro. This firmware can reset your device to its factory mode, fix bootlop(phone hangs in boot logo etc. Also note that this stock rom is not be used in another device to avoid phone crashing/dead unable to boot or connect to a computer and also make sure your battery percent is up to 40% before flashing/factory reset.
Landvo XM200 Pro MT6737
Os Version: 6.0 Marshmallow
[Download Stock Rom ##download##]
HOW TO FLASH THIS DEVICE USING SP FLASHTOOL:
- Open Sp flashtool which has been installed on your pc if you dont have it get it HERE
- Locate and Click on Scatter-loading option & browse to the scatter file of your Stock ROM. ( the scatter file is always located inside the unzipped stock rom file you downloaded)
- Select the scatter file which is located in the stock rom downloaded file and load it
- Select the pattern you would like to use Eg DOWNLOAD ONLY, FORMAT ALL+ DOWNLOAD OR FIRMWARE UPGRADE.... after that click on download
- Turn Off your device and connect it to your pc and wait for the device to complete flashing
- If you dont understand the procedure above click HERE to get full tutorial with images.
If you experience bootlop(phone hangs in boot logo) navigate to your phones recovery mode and perform a factory reset.
COMMENTS