Download Lenovo K33 All Variants Factory Stock Rom
LENOVO K33 SMARTPHONE FEW SPECS:
- Touchscreen Capacitive touchscreen
- Display Size, Type 5", IPS LCD, 294 PPI (pixel density), Multi-touch
- Resolution, Colors 1280 x 720 pixels, 16 M
- SIM Type Dual SIM
- Processor & Chipset Quad core 1.0 GHz & MediaTek
- GPU Mali T720 GPU
- RAM 1 GB RAM
- Internal Memory 8 GB
- External Memory Expandable up to 32 GB (microSD)
- Colors Black, White
- OS Android, Marshmallow 6.0
- CameraPrimary Camera 8 MP
- Secondary Camera 2 MP
- Flash LED
- Additional Information Geotagging, Autofocus, FHD Recording (1080p), 30 Frames per second
This is the factory stock firmware for lenovo k33 and should not be used in another device. This stock can help you Unbrick your phone, To Fix the Bootloop problem, You can upgrade and Downgrade your phone, Unroot or Fix Bugs on your phone, Fix the lag or stutter, Solve the soft brick on your phone, To revert back to stock to gain your warranty.
Os Version: Android 6.0 Marshmallow
[Download Stock Rom ##download##]
Lenovo_K33_S222_Q00440_20170523
Os Version: Android 6.0 Marshmallow
[Download Stocl Rom ##download##]
Lenovo_K33_S223_Q00440_20170610
Os Version: Android 6.0 Marshmallow
[Download Stock Rom ##download##]
HOW TO FLASH THIS DEVICE USING SP FLASHTOOL:
- Launch Sp flashtool install on your pc if you dont have it get it HERE
- Click on Scatter-loading option & browse to the scatter file of your Stock ROM. (You can find the scatter file with the stock rom unzipped file)
- Select the scatter file and load
- Switch Off your device and connect it to your system/Select the pattern you would like to use Eg DOWNLOAD ONLY, FORMAT ALL+ DOWNLOAD OR FIRMWARE UPGRADE.... after that click on download and wait for the device to complete flashing
- For Full Complete tutorial on how to flash this device click HERE
You can use the tutorial above using sp flashtool method or you can use the below method for flashing lenovo smartphones.
THINGS YOU WILL NEED:
- A PC
- A USB CABLE (that can be detected by a pc)
- BRAIN
In other to begin you have to first
- After downloading the above you need to extract the ONTIM Marvell MultiDL, and place it in your system where it cn be easily located.
- Open the extracted file and launch the ONTIM_Marvell_MultiDL.exe, as shown in the image below:
- Next In the tool on the left side of the interface click on the System and then click Config, and then in the following Blf File text box to select the software to be downloaded after the blf file, select the click button to save the exit,
- Now Click on the main interface in the tool and click Run, On your Keyboard Press F9 key before pressing F9 note before tapping the f9 or even lauching the flashtool please make sure you install the Driver 1st. you can find this in ONTIM Marvell MultiDL Folder.
- Disconnect the phones battery and then put it back, hold volume up button"+" key, insert the USB cable, pop-up prompt box to install the driver, follow the prompt "click", automatically install the driver, after installation In Device Manager, the following new device appears:
- After successfully installed the drivers, Now the next step is. to unplug the data cable, and then re-deduction and then install the battery (more than 50% of the power), hold the volume "+" key, insert the USB cable, until the progress of the change (blue).
- This process takes about 5-10 minutes to complete, as shown in the below image, the download the progress of the green, on behalf of the success of mobile phone. (If the download progress bar turns red, it means that the download failed. Please repeat step 5)
after the upgrade step has been completed successfully, click the menu bar System - stop. The tool will stop running, unplug(disconnect) the cable from the device, put back battery and switch on the phone, first boot takes time, please be patient.
COMMENTS