Download Acer E3 E380 Factory Stock Rom
DEVICE SPECIFICATIONS:
- Device type: Smart phone
- OS: Android (4.2.2)
- Dimensions: 5.43 x 2.72 x 0.35 inches (138 x 69 x 8.9 mm)
- Weight: 4.73 oz (134
- Physical size: 4.7 inches
- Resolution: 720 x 1280 pixels
- Features: Light sensor, Proximity sensor
- Camera: 13 megapixels
- Flash: LED
- Front-facing camera: 2 megapixels
- System chip: MediaTek MT6589
- Processor: Quad-core, 1200 MHz, ARM Cortex-A7
- Graphics processor: PowerVR SGX544MP
- System memory: 1 GB RAM
- Built-in storage: 4 GB
- Storage expansion: microSD, microSDHC up to 32 GB
Acer E3 E380 Stock Rom
Android Os version: 4.4.2 Kitkat
[Download Stock ROM ##download##]
Size: 704mb
Before you start the manual upgrade setup, make sure you have a high amount juice(battery) with at least 50% Charge. If you do not have up to that, please charge the phone. Backup your phone in case if you need it later. If you brick the device we are not responsible. Your doing this at your own risk. this guide is to update Stock ROM on Tecno S1E Pro only.
HOW TO FLASH THIS DEVICE USING SP FLASHTOOL:
- Open Sp flashtool which has been installed on your pc if you dont have it get it HERE
- Locate and Click on Scatter-loading option & browse to the scatter file of your Stock ROM. ( the scatter file is always located inside the unzipped stock rom file you downloaded)
- Select the scatter file which is located in the stock rom downloaded file and load it
- Select the pattern you would like to use Eg DOWNLOAD ONLY, FORMAT ALL+ DOWNLOAD OR FIRMWARE UPGRADE.... after that click on download
- Turn Off your device and connect it to your pc and wait for the device to complete flashing
- If you dont understand the procedure above click HERE to get full tutorial with images
COMMENTS