Download Wiko Lenny 3 Marshmallow 6.0 Stock Firmware
 |
| Wiko Lenny 3 |
DEVICE SPECIFICATIONS
- Dimensions 145 x 73.1 x 9.9 mm (5.71 x 2.88 x 0.39 in)
- Weight 177 g (6.24 oz)
- SIM Dual SIM (Mini-SIM/ Micro-SIM, dual stand-by)
- Type IPS LCD capacitive touchscreen, 16M colors
- Size 5.0 inches (~65.0% screen-to-body ratio)
- Resolution 720 x 1280 pixels (~294 ppi pixel density)
- OS Android OS, v6.0.1 (Marshmallow)
- Chipset Mediatek MT6580M
- CPU Quad-core 1.3 GHz Cortex-A7
- GPU Mali-400MP2
- Card slot microSD, up to 64 GB
- Internal 16 GB, 1 GB RAM
- Primary 8 MP, f/2.0, LED flash
- Secondary 5 MP, f/2.4, 1/5" sensor size, 1.1µm pixel size
- Li-Ion 2000 mAh battery
HOW TO FLASH THIS DEVICE
- After downloading the rom file, extract the installation file to your computer’s desktop.
- Run the installation software as administrator.
- If prompted, click on “OK” to start rebooting your computer into safe mode. For Windows 7 only.
- For Windows 8/10, if necessary:
- – Disable driver signing
- – Turn Windows Firewall on or off
- Launch the update software by selecting Run as Administrator.
- Phone powered off, press on Volume up and Vvolume down, then connect the phone to the computer via a USB cable, hold the two buttons until the software starts downloading.
- Please wait a few minutes so that the drivers will install correctly before clicking on the ‘Download’ button. You can check the progress of the driver installation by clicking on the installation icon in the taskbar(at the bottom right of your screen).
- Qualcomm HS-USB QDloader Loader drivers should now install.
- Then click on the ‘Download’ button
- The update process will begin and would show 100% when it’s completed.
- You can now disconnect your phone from the PC and power it on.
COMMENTS