Download Tecno P9 Stock Firmware(Charging issue fixed)
This stock rom is for tecno p9 and should not be used in another device, for those that experience charging issues with other previous p9 firmwares should use this one, it has been tested and confirmed that the charging problem has been fixed. This firmware can be used to wake bricked/dead tecno p9.
For those who are performing mtk device flashing for the first time should follow the below procedure carefully.
Note: If you didnt see any cache or user data in the rom folder perform factory reset before booting your device, some android devices experience boot-lop after flashing so performing a factory reset normally does the trick.
How To Flash This Device
1>>Unzip the Phones Stock Rom And place it in desktop or anywhere it can be located easily.
2>>Launch Sp flashtool install on your pc if you dont have it get it HERE
3>>Click on Scatter-loading option & browse to the scatter file of your Stock ROM. (You can find the scatter file with the stock rom unzipped file)
3>>Select the scatter file and load
4>>Switch Off your device and connect it to your system/Select the pattern you would like to use Eg DOWNLOAD ONLY, FORMAT ALL+ DOWNLOAD OR FIRMWARE UPGRADE.... after that click on download and wait for the device to complete flashing
For Full Complete tutorial on how to flash this device
Android 4.4
P9-T102-20141103
COMMENTS